Skip to main content
Cabinet painting service by Shape of Paint

Cabinet Painting in Burnaby, BC

Cabinet Painting in Burnaby with a walkthrough first, a written quote, and a schedule that holds from setup to the final check.

Request an Estimate

Burnaby • Cabinet Painting

What cabinet painting in Burnaby involves

Cabinet painting needs degreasing, sanding, a bonding primer and a controlled spray finish. Skip any of those and the finish fails early.

Burnaby Heights homes built in the 1980s still carry their original oak cabinets with dark stain and raised panels. Your condo kitchen near Metrotown likely has limited ventilation for spray equipment. The right spray system depends on the space -- AAA, airless, and low-overspray setups each suit different site conditions. Multi-unit buildings where air handling is restricted need careful equipment selection before any spray work begins.

Homeowners comparing cabinet painting should look at the preparation and the coating system, not the speed of a quick paint-over.

Most cabinet painting projects in Burnaby run $6,500 to $18,400. Condo ventilation limits and oak doors needing full sanding are considered when defining the preparation and finish your project needs. Your consultation defines the scope, products and finish level, with the pricing approach explained in your proposal.

Local proof

4.9

Google rating across 54 homeowner reviews.

Clear written quotes, thorough preparation, and daily updates from the first walkthrough to the final handoff.

Where we work

Brentwood • Burnaby Heights • Metrotown • Edmonds

Every area has its own light, moisture, and wear. We plan cabinet painting around those conditions from the start.

View Other Burnaby Services
Cabinet spray finish by Shape of Paint

Cabinet Painting in Burnaby

A premium finish. A calmer project experience.

Kitchen and bathroom cabinets refinished with professional spray systems and 2K coatings for a smooth, hard-wearing surface. In Burnaby, that means careful preparation, a clear schedule, and finish decisions made before work starts.

How we plan and deliver cabinet painting in Burnaby

Kitchen and bathroom cabinets refinished with professional spray systems and 2K coatings for a smooth, hard-wearing surface. Every stage is written down before work begins, so the finish is clean, the timing is clear, and the handoff is calm. See our cabinet painting service guide for coating options and preparation details.

Prep

01

Remove and label every door and drawer front, then degrease, sand and repair each piece.

Coat plan

02

Apply a bonding primer and spray 2K finish coats off site in controlled conditions.

Final review

03

Reinstall doors and hardware with alignment checks, and walk through care and curing with you.

Materials and finish control

Product systems matched before the first coat

Product selection follows substrate condition, wear pattern, and maintenance goals. That is how we keep adhesion, colour depth, and maintainability aligned with the way a space is used.

Typical project range: $6,500–$18,400

Burnaby Homeowners

What Burnaby homeowners say about working with us

“The kitchen looks like a brand new kitchen was installed. I still cannot believe they are my old cupboards. The quality is unbelievable. His eye for detail is incredible — top quality workmanship.”

— Marinda

Materials we specify for cabinet painting

Renner
ALCEA
Livos

FAQs

Cabinet Painting in Burnaby: common questions

These are the questions we usually answer before a project is booked, priced, and placed on the calendar.

How much does cabinet painting cost in Burnaby?
Most cabinet painting projects run $6,500 to $18,400. Your consultation defines the scope, products and finish level. Your proposal explains whether the work is a firm quote or a time-and-materials project.
How long does cabinet painting take in Burnaby?
Most kitchen cabinet projects take 5 to 8 business days. Doors are removed and sprayed off-site while frames are finished in your kitchen. Your quote gives a specific timeline, and we tell you if anything changes.
Do you help with product and colour decisions for cabinet painting?
Yes. We match primer, topcoat, and sheen to the surface, how the room is used, and how you want it to wear. Colour guidance is part of every project, with large swatches tested on your own walls.
What quality controls are used for cabinet painting in Burnaby?
Every surface is tested before it is coated. Prep standards are written down, you get daily updates, and the project ends with a walkthrough where we check every edge together.

Ready to plan the exact scope for your home?

Book a walkthrough and get a written quote, start dates, and prep standards in writing before anything is scheduled.

Book any season. Condo projects need strata approval for spray equipment, so allow two extra weeks for building coordination before your start date.

Vancouver home interior freshly painted by Shape of Paint
Kitchen cabinet spray finish in matte white
Exterior painting detail on Vancouver craftsman home
Hand-finished accent wall with designer colour palette
Cabinet door drying in spray booth - artisan finish process
Before and after interior painting transformation