Skip to main content
Vancouver home painted by Shape of Paint

House Painters in Vancouver, BC

House painters in Vancouver for interior painting, exterior painting, cabinet painting, decorative finishes, deck and fence staining, and custom millwork. You get a walkthrough, a written quote, and a schedule that holds.

Request an Estimate
4.9/5
54 Google ReviewsLicensed & Insured

Our Approach in Vancouver

How we work in Vancouver

Your Vancouver home sees rain on about 166 days a year. Every project starts with the surface under the paint, from Kitsilano heritage siding to West Side new builds.

Constant moisture softens old caulking, lifts paint on wood and punishes a rushed primer choice. Your exterior coating has to be rated for damp surfaces. The all-purpose primer most painters reach for will not hold here.

What each project includes

  • 1A walkthrough of each surface before anything is scheduled
  • 2Coatings matched to each surface, never one primer for everything
  • 3Daily updates, end-of-day cleanup, and a final walkthrough together

Areas We Serve

Neighbourhoods across Vancouver

We work throughout Vancouver. Each neighbourhood has its own housing stock and surface conditions, and we plan for those details before work begins.

Kitsilano
Mount Pleasant
Dunbar
Kerrisdale
Shaughnessy
Point Grey

Walk down Vine or Yew Street in Kitsilano and you will see original fir siding on most blocks. That wood wants careful hand scraping rather than power tools. In Shaughnessy, deep covered porches and multi-level trim hide moisture behind fascia boards for months. Mount Pleasant character homes and row houses sit shoulder to shoulder, so access and neighbour coordination go into the schedule from day one.

Why Shape of Paint

Why Vancouver homeowners choose us

Your home sits somewhere between a 1920s Craftsman in Dunbar and a new infill along the Cambie Corridor. Cedar shingle, stucco and Hardie board each need their own preparation and product. Most homes here have at least two surface types on the same wall, and the join between them is where a finish fails first. Every wall is mapped surface by surface before coating begins.

  • Fixed written price

    Standard painting has a fixed quote for the agreed scope. Specialty work may use time and materials.

  • Protected home

    Floors covered, air filtered, and rooms cleaned at the end of each day.

  • Written warranty

    If our workmanship fails, we come back and fix it at no charge.

  • Three generations

    A family of finishers with roots in building homes since the 1950s.

Map the scope before pricing the work

House painters Vancouver homeowners hire should explain how they build an estimate. Gabe Penner visits your property and identifies each surface before writing the scope. Shape of Paint sends the detailed quote within 48 hours after that visit.

Standard painting scopes receive a firm total instead of a bill that keeps growing. Open-ended work, including popcorn ceiling removal and specialty finishes, uses time-and-materials pricing. The paperwork states the pricing method before your work date is placed on the calendar.

Payment is split into a 30% deposit after acceptance and 70% after your approval. You make no progress payments while the painting work is underway in your home. The proposal records the work window and completion date, giving you one clear schedule.

Give preparation the time it needs

Surface preparation receives 60% of each project, compared with 15% for most painters. That time covers inspection, repair, sanding, priming, and other work beneath the coating. Repairs and primer can then address the actual condition found beneath the old coating.

Before interior painting, the crew checks adhesion, moisture, and the coatings already present. Those findings guide repairs, sanding, and the primer selected for each surface. Plaster, drywall, trim, and millwork require different treatment before paint is applied.

Exterior painting also begins with the surface rather than one standard product. Cedar, stucco, Hardie board, brick, and painted aluminum each need suitable coating systems. Primer selection accounts for Vancouver rain, salt air, ultraviolet light, and organic growth on north-facing walls.

Match each product to the surface

For most interior walls, painting crews use Benjamin Moore or C2 Paint products. Kitchens and bathrooms receive high-humidity lines chosen for steam and regular moisture. Keim and Livos provide zero-VOC or plant-based options when those products fit the scope.

Cabinet painting uses 2K coatings from Renner, Acroma Pro, or ALCEA instead of wall paint. Doors are removed for off-site spray finishing, while frames remain inside the kitchen. Crews select AAA, airless, or HVLP equipment to suit the surface and coating.

Decorative painting uses Marmorino and Venetian plaster with Metropolis, Novocolor, or MEODED products. These finishes are applied by hand to build the specified decorative surface. Millwork painting protects detailed profiles by repairing damage before sanding and recoating.

Protect floors and manage indoor air

Interior painting uses the Floor Protection System before tools enter the work area. Crews place craft paper first, then 1/8-inch Masonite and water-impermeable shingle underlayment. These layers protect floors from marring, scratches, dents, dropped tools, and water.

The AirCare System stays active throughout interior work inside your occupied home. Three-stage HEPA filtration and activated carbon mitigate particulates, dust, debris, and VOCs. The equipment remains in use for the full duration of the interior project.

A 12-point site checklist sets a daily housekeeping standard while painting continues. Together, both systems create defined protections for floors and indoor air during the work. Ask how those protections will cover the rooms included in your written scope.

Check who owns the final standard

Gabe Penner is the co-founder and lead technician responsible for project production. He leads the walkthrough, writes the scope, and approves the final coating quality. Since the 1950s, three generations of his family have worked in home building and finishing.

The operations team manages intake, scheduling, and daily operations behind the written plan. It prepares clear quotes and timelines that stay connected to the work calendar. About half of new work reaches the company through referrals from interior designers.

Shape of Paint is licensed in British Columbia and carries general liability insurance plus workers compensation. Each painting project includes a written workmanship warranty with its period stated in the quote. Covered peeling, cracking, or coating failure is repaired without charging you for that work. Request an Estimate to arrange your on-site walkthrough and receive a written scope.

Common Questions

What Vancouver homeowners ask

What painting services are available in Vancouver?
Interior painting, exterior painting, cabinet painting, decorative finishes, deck and fence staining, and custom millwork and feature wall finishing, all in Vancouver. Each one starts with a walkthrough and a written scope.
How much does painting cost in Vancouver?
Interior painting in Vancouver typically ranges from $3–$8 per square foot, while exterior projects fall between $4–$12 per square foot. These are directional ranges—not fixed rates. Pricing shifts based on scope complexity: the number of substrates involved (drywall, millwork, masonry), the preparation standard required, site access, and the coating systems specified. A simple repaint and a multi-surface, prep-intensive project may share the same square footage, but they are not equivalent in cost. Accurate pricing requires a defined scope—mapped surfaces, specified products, and a clear level of finish.
Do you handle Venetian plaster and decorative finishes in Vancouver?
Yes. Marmorino, Venetian plaster, limewash, and layered texture are applied by hand with Metropolis, Novocolor, and MEODED materials. You approve a sample board in your own room before the wall is done.
Can you restore outdoor wood surfaces in Vancouver?
Yes. Outdoor wood is washed, checked for moisture, and stained with penetrating systems from Livos, C2, or Sansin, timed to the dry weather the wood needs.
How does your process reduce project risk in Vancouver?
We walk your home and test each surface before the quote is written. The quote names the product for each surface, the start window, and the completion date. About 60% of the project goes to surface work before paint. You get daily updates, a 12-point site check each day, and a written workmanship warranty.
Shape of Paint team preparing a project

Vancouver Painting Team

Ready to plan your Vancouver project?

Ask for a walkthrough. Your written quote follows within 48 hours with the products, the dates, and the price. Late June through mid-September is your driest window. Booking for July or August gives the longest cure time between coats and the lowest chance of rain interrupting prep. Plan early -- Vancouver summer schedules fill by April.